Gas detection3
Respiratory protection4
Technical rescue9
Firefighting4
Safety & environment4
Personal protective equipment2
Dräger M18 — drying cabinet for masks (18 pieces)
The Dräger M18 (manufactured by Harstra Instruments) is a compact, space-saving drying cabinet for masks and small ODO equipment — it dries up to 18 masks/half-masks (2 baskets of 9 pcs each) at the same time, or helmets and other small equipment on the appropriate basket. Built-in sensors detect when the equipment is already dry and automatically end the cycle — without the risk of over-drying and damaging the mask material. Automatic drying cycle approx. 2 hours.
Key features
- Dries up to 18 masks/half-masks at the same time (2 baskets of max. 9 pcs each).
- Also helmets and other small ODO equipment — just choose the appropriate basket.
- Automatic mode — a humidity sensor switches off drying by itself once the equipment is dry.
- A timed mode is also available (timer 1 min – 99:58 h).
- Compact, space-saving construction — the smallest dryer in the Harstra range.
- Housing: Metalco steel, hot-dip galvanised, RAL 9016 powder coating; door interior in polished stainless steel.
- Magnetic door seal, drip tray in polished stainless steel.
- F5-class air filter (EN 779) at the inlet.
- 2 standard wire baskets included.
Technical specifications
| Parameter | Value |
|---|---|
| Type | compact drying cabinet for masks and small ODO equipment |
| Capacity | up to 18 masks/half-masks (2 baskets of max. 9 pcs each); helmets and other small equipment can also be dried |
| External dimensions (H × W × D) | 960 × 602 × 604 mm |
| Internal dimensions (H × W × D) | 680 × 542 × 500 mm |
| Chamber capacity | 185 l |
| Weight | approx. 80 kg |
| External / internal housing | Metalco steel, hot-dip galvanised, RAL 9016 powder coating |
| Door | 1, polished stainless steel interior, magnetic seal |
| Drip tray | polished stainless steel |
| Feet | 4, adjustable (levelling) |
| Thermal insulation | glass wool, min. 30 mm |
| Temperature range | up to 58°C — factory-set to 52°C |
| Temperature display / timer | digital LED; timer 1 min – 99:58 h |
| Temperature control | 2× PTC sensor, solid-state relay (SSR) |
| Humidity measurement | capacitive sensor (automatic shutdown once dry) |
| Temperature protection | additional thermostat, max. 62°C |
| Heating | direct, approx. 2 kW |
| Air circulation | 1 quiet fan |
| Air exchange | outlet at the top of the cabinet, Ø32 mm PVC pipe; inlet from the bottom through the filter |
| Filter | class F5, EN 779 |
| Baskets included | 2, removable, stainless steel (max. 9 masks each) |
| Drying time | approx. 2 hours (depending on the number of masks and humidity) |
| Power supply | 230 V AC, N+PE, 50–60 Hz |
| Power | approx. 2.1 kW, 1×16 A protection |
| Energy consumption | average approx. 0.4 kWh per cycle |
| Manufacturer | Harstra Instruments — distributed under the Dräger brand |
Suitability
The M18 dries respiratory-protection masks and half-masks (up to 18 pcs at the same time) and — on the appropriate basket — helmets and other small equipment. Equipment must be properly cleaned and disinfected before drying (e.g. in a Harstra Wash 9 or Wash 36 washer). The M18 is not intended for turnout clothing (for that, the K series) or for breathing apparatus — the dedicated Harstra M45B is intended for SCBA.
Applications
Respiratory-protection service stations, volunteer and state fire stations, workshops for maintaining respiratory-protection equipment — fast, gentle drying of masks after cleaning, with no risk of damaging the material with high temperature.
Frequently asked questions (FAQ)
How many masks fit in the M18?
A maximum of 18 masks/half-masks at the same time — in 2 baskets of 9 pieces each.
Will the M18 also dry helmets and other equipment?
Yes — just use the appropriate basket (optional accessories are available, including other wire-basket sizes).
Does the drying cycle need to be monitored?
No — the humidity sensor detects drying on its own and switches the device off (approx. 2 hours, depending on the load); a timed mode is also available.
Is a larger version available?
Yes — the Dräger M-45 model (up to 45 masks) is also available, along with the M45B version with an option for drying breathing apparatus (SCBA). Ask about the right choice for your unit.
Brand & service
The equipment and implementation are in the SafeTech range — delivery, commissioning, operator training and service. We equip respiratory-protection workshops and arrange equipment servicing at the customer's site.
Why SafeTech
- 23 years of experience in safety and gas detection (the company has operated since 2003).
- In-house respiratory-protection service station: cleaning, drying, testing and maintenance of breathing apparatus and masks.
- Service, inspections, pressure tests and certification in Suchy Dwór near Gdynia — service across Poland.
- Training and technical support (SafeTech Safety Academy).
Availability & service — Gdynia and Tricity
Dräger M18 — drying cabinet for masks (18 pieces) — sales, selection, delivery and service in Gdynia (Suchy Dwór, on the border of Gdynia and the Kosakowo municipality). We serve the Tricity (Gdańsk, Sopot, Gdynia), Rumia, Reda, Wejherowo, the Pomerania region and all of Poland. Ask about pricing and availability.
